How To Fix mobile data isn’t working

How To Fix mobile data isn’t working | internet problems

How to Fix Mobile Data Not Working on Android

If you’re having problems connecting to the internet using mobile data, try these steps:

  • Go to Settings and make sure mobile data is switched on
  • If you have a 4G device, go to Settings and check 4G is switched on
  • Check your Network mode is set to automatic
  • Try turning you phone off and back on

Still not working? You’ll need to reset your network settings by following the steps relevant to your device. Resetting your network settings will mean you lose your saved Wi-Fi passwords, VPNs, APNSs and saved Bluetooth devices. Just follow the steps relevant to your device.

Instagram is the dominant photo-sharing platform on the Internet and has become the sole social media site used by people who prefer to express themselves with pictures rather than words. But what do you do when Instagram goes down? Here we show you the main reasons for Instagram not working and how you can fix it.

Note: a good place to begin is restarting your device and making sure you have a stable Internet connection. If you’ve tried both and Instagram’s still not working, then read on.

When mobile data stops working on Android, it’s world-shattering, in other words. Here are some tips on how to get it back.

May You Like

Reset Your APNs

Access Point Names (APNs) are the means by which your mobile network provider connects your phone to the mobile Internet. It sets your phone up with all the crucial settings, like IP addresses and gateways, to (hopefully) get you connected. However, this process can sometimes go wrong and require a reset. The following shows how to do it.

Go to “Settings -> Network & internet -> Mobile network -> Advanced -> Access Point Names.”

You should see a list of APNs (potentially with only one network on them). Tap the menu icon at the top right, then “Reset to default.”

 

Set APN Protocol to iPv4/IPv6

This option doesn’t exist in the APN settings of all phones, but some devices (like the OnePlus 3) give you the option of leaving the APN Protocol field blank. If that’s the case in your network’s APN settings, make sure it says IPv4/IPv6 instead. Likewise, with other devices, make sure it says this rather than just one of the two.

 

Enter Your APN Settings Manually

It’s a sad but not uncommon occurrence for your APN settings to get out of whack after an Android software update, and if a standard reset doesn’t fix the problem, then you may need to enter your APN address manually.

 

  1. Go to your APN list using the method in the previous tip, then tap the “+” icon in the top-right corner.
  2. Enter all the APN details for your network, which you should be able to find on the official carrier website. Or you can check out this list of APN settings for US, UK, Indian and other national carriers.
  3. Save your new APN settings, then select them from the APN list on your device.

 

Wipe Cache Partition from Recovery

On your phone, there’s a fair portion of your device’s memory dedicated to the cache – where data for various apps and processes is stored “on the backburner,” activating automatically so that these apps and processes boot up more quickly on your device.

But sometimes, as reported by certain Android users, errors can occur in the cache which can cause crucial processes – in this case your data connection – to stop working. To fix this, you need to clear the system cache partition, which is accessed from your phone’s recovery screen. Getting to your recovery varies slightly between phones, but on a standard stock Android device, do the following:

Switch off your phone, then when switching it back on, hold the Power and Volume Down buttons until the Android droid pops up on your screen.

Use the volume buttons to navigate to “Recovery Mode.” On the next screen, it may “No command.”

If you see this, you need to try holding different combinations of the volume buttons and the power button until you enter recovery (depending on your device).

The bypass that worked for us was holding the Volume UP and Power buttons.

Once you’re in recovery, use the volume buttons on your phone to select “wipe cache partition” or “wipe cache,” then select the option using the power button.

The process should only take a few seconds. Once it’s done, reboot your phone.

 

Reset Your Phone’s Network Connection

A simple and powerful fix for data not working on your Android device is to enter an SCRTN (Special Code to Reset the Network). Note that this fix will only work for phones using CDMA networks. In the U.S., these networks are T-Mobile, Verizon and US Cellular.

Assuming you’re with a CDMA network, go to your phone dial pad and enter the following code, depending on your device:

  • Google Pixel, Moto G7: *#*#72786#*#*
  • Nexus 5, Nexus 6, Moto G5: #*#*72786##
  • Other Android phones: ##72786#

Note that phone carriers are slowly trying to phase out CDMA networks, as they seek to move wholly onto the faster, more recent LTE standard, so this particular fix may not exist for much longer.

 

Enable the Right Network Mode

Starting with the simplest solution, it’s possible that during an update, or simply in the phone’s default settings, the network mode (3G, 4G, etc.) of your phone is set to one that doesn’t offer optimal coverage.

If you have a 4G phone, for example, you should always make sure 4G is selected in your network modes to catch those sweet 4G rays. Or if your phone isn’t 4G but you’re running on an OS that features it as a network mode (by rooting, for example), your phone may be trying to connect to 4G signals that it’s not capable of.

Changing this is simple. Go to “Settings -> Network & Internet -> Mobile network -> Preferred network type,” then switch to the one that best suits your phone. As my phone is a 4G, I go for 2G/3G/4G Auto so that it always tries to connect to the best signal available.

 

Remove and Re-Insert Your SIM Card

Some will scoff at the very mention of suggestions like “reboot your phone” and “remove and reinsert your SIM card,” but these should always be the first port of call when trying to fix mobile data issues. Another option is to test your phone with another SIM card to see if the issue originates in the phone or the card.

 

May You Like

Top 10 Tool Convert your PNG to JPG Online for Free

There’s also an extra little trick to rebooting your phone that could help:

  • Before rebooting, turn on Airplane Mode.
  • Wait for 30 seconds, then turn Airplane Mode off.
  • If you still don’t have data, turn airplane mode back on, turn your phone off, wait for a minute, turn your phone back on, turn airplane mode off, wait for 30 seconds, then turn mobile data on.

If this fails, then try the following fixes.

 

Do You Have a Mobile Data Limit?

Every Android phone lets you set your own mobile data limits and warnings for when you’re about to reach your limit. These aren’t usually switched on by default, but maybe you set a limit previously, have since upgraded your tariff, and have forgotten to update your mobile data limit accordingly. To check this:

Go to “Settings -> Network & Internet -> Mobile network.”

Make sure “Mobile data” is switched on, then tap “Data warning & limit.”

Here you need to make sure that “Set data limit” is switched off, or at least that it isn’t any lower than the limit provided by your network.

There it is the key to getting you back online just when you thought you’d have to start resorting to paper maps and pigeon mail to communicate with people.

Now that you have mobile data working again, why not put it to the test with one of these Internet speed test apps. Alternatively, check out our list of the best Firefox for Android add-ons.post secure

Leave a Comment

Your email address will not be published. Required fields are marked *